Top-rated independent heating and cooling across South Florida
Furnace Repair in Edgewater, FL — Book a Visit Today
Cold mornings do arrive in Edgewater, and when the heat will not come on, we come look. Our heating repair work covers systems that ignite and quit, blow cool air, cycle on and off, or make a noise you have never heard before. If you ever smell gas, get everyone out of the house first, then call 911 or the gas utility from outside, and call us after. For everything else, check the thermostat and the breaker, then reach out. Furnace repair in Edgewater is usually a short visit once we know what the system is doing. Call or use the quote form.
Call (888) 560-0120- You reach a person, not a menu
- Open every day
- The quote comes first, in writing
Taking calls until 5:00 PM ET
Common furnace faults in Edgewater homes
- The heat blows cold air Failed ignition sequence, dirty flame sensor, or a burner that lights and drops out
- It runs a few minutes then shuts off Short cycling from a restricted filter, blocked return, or a limit switch tripping on high heat
- Nothing happens when I raise the temperature Thermostat wiring or settings, tripped breaker, blown low voltage fuse, or a dead control board
- There is a loud bang when the heat kicks on Delayed ignition from dirty burners or a gas valve and ignitor timing problem
- The blower runs but the house never warms up Heating elements or gas heat not firing while the fan keeps circulating room air
Whether you call it furnace repair, heating repair or heater repair, the work is identical and so is the quote you approve first.
Edgewater coverage
From Edgewater we also cover New Smyrna Beach, Oak Hill, Port Orange, South Daytona and the communities along the river in between.
Other repairs we do in Edgewater
What homeowners in Edgewater get from an independent HVAC company
| King Air & Heating | Big-box repair chains | Handyman listings | |
|---|---|---|---|
| You approve a written quote first | ✓ | ✕ | ✕ |
| Phones answered by people, every day | ✓ | ✕ | ✓ |
| Every major brand, gas or electric | ✓ | ✓ | ✕ |
| Independent, no manufacturer quotas | ✓ | ✕ | ✓ |
| Techs who know the local housing | ✓ | ✕ | ✓ |
What you get on every job
Written quote before any work
Covering 119 cities across Florida.A real person answers
Open 7 days, 8:00 AM to 5:00 PM ET.All major brands serviced
Carrier, Trane, Lennox, Goodman and more. We are not an authorized dealer for any of them.Furnace Repair in Edgewater — quick answers
Why does my furnace blow cold air instead of heat?
Usually the burners are not staying lit or the heat source is not firing at all. A dirty flame sensor, cracked ignitor or closed gas valve are common causes. The blower still runs, so you feel room temperature air. We test the ignition sequence on site.
Is a no-heat call something you can come out for the same day?
Often yes, depending on where you are and how the schedule looks that day. Call and tell us the house is cold and what the system is doing. We will give you a realistic arrival window rather than a guess.
What if I smell gas near the furnace?
Leave the building right away, take everyone with you, and call 911 or your gas utility from outside. Do not flip switches or restart anything. Once the utility says the house is safe, call us and we will inspect the furnace and gas train.
How long does an ignitor or flame sensor repair take?
Both are usually same visit repairs. A flame sensor often just needs cleaning or replacement, and an ignitor is a common carry item. We run the furnace through several full cycles afterward to confirm it lights and holds flame.
How soon can you get to my house in Edgewater?
Most Edgewater calls get a same day or next day visit, and no-cooling calls move to the front of the line during summer heat. Afternoon storms sometimes push our arrival window, so we call ahead if a job runs long. Before we arrive, check that the thermostat is set to cool with fresh batteries, look for a tripped breaker, and clear leaves or clippings away from the outdoor unit.
How it works
- Step 1
Tell us the symptom
Call or fill in the quote form and describe what changed. Warm air, short cycling, a breaker that keeps tripping, water stains on the ceiling. That detail helps us bring the right parts.
- Step 2
We diagnose on site
A technician checks the thermostat, the electrical side, refrigerant performance, airflow and the condensate line. We find the actual cause instead of swapping parts and hoping the problem stays away.
- Step 3
You approve the repair
We explain what failed, what it takes to fix it, and how long the part is likely to last. Nothing gets replaced until you say go, and we test the system before leaving.
- A real person answers
- Open 7 days
- Written quote before work starts
Why homeowners call us
- Built for the salt airCoastal Florida is hard on outdoor equipment. Coils corrode, contactors pit, fan motors seize early. We look for that damage during every air conditioning repair so a small failure does not take the whole system down.
- Condensate lines we actually clearBy late summer, drain lines clog with algae and shut systems off on the float switch. We clear the line, check the pan and the safety switch, and show you what caused the backup.
- Heating tooCold snaps still arrive. We do heating repair and heater repair on heat pumps, strip heat and furnace repair where homes have one, so the system works in January as well as August.
- Plain talk about older systemsIf a repair makes sense, we repair it. If a unit is failing in ways that will keep costing you, we say that too and lay out the options. You decide, not us.
- All major brands, gas & electricEvery major HVAC brand, gas and electric, handled by an independent crew.
- Straight answersWhen a replacement beats a repair, we tell you, sometimes before we roll a truck.
Furnace Repair in Edgewater
Each broken day has a price tag
Fault described, quote approved, repair done. The first step takes a minute.
- A real person answers
- Open 7 days
- Written quotes
- All major brands
- Gas & electric
Rather not call? Get a free quote →